3d Mode 1 sticks // ZMR250V2 // DAL TJ5045
- about 8 years ago
- 288 VŪZ
3 - 0
- Report
I was requested to do some stick footage so here it is :) ,please note talking while flying isn't easy lol Still need to update to 2.3.2 and try the new 3DAirmode xD Thanks to Zoe for pushing me to try this! ZMR250 V2 No PDB - http://www.fpvmodel.com/zmr250-v2-carbon-fiber-mini-fpv-quadcopter-frame-without-pdb_g1071.html?u=FE41C53FBBA03BA8 http://www.surveilzone.com/ TJ5045 Tri props - http://www.surveilzone.com/2-Pairs-3-blade-DALprop-TJ5045-Props-for-FPV-Racing-g-1488 MN2206 2000KV motors SMC True Spec 1800mah 4S - http://www.coast2coastrc.com.au/true-spec-1800mah-14-8v-51a/ F1FC - betaflight 2.3 Littlebee 20's - http://buzzhobbies.com.au/index.php?route=product/product&product_id=838 ///////// settings changed /////////// set min_check = 1040 set min_throttle = 1050 set 3d_deadband_low = 1406 set 3d_deadband_high = 1514 set 3d_neutral = 1500 set 3d_deadband_throttle = 20 set gyro_lpf = OFF - 2khz xD set yaw_jump_prevention_limit = 500 set acc_hardware = 1 set baro_hardware = 1 set mag_hardware = 1 ///////// Pids /////////// set pid_controller = MWREWRITE set p_pitch = 56 set i_pitch = 42 set d_pitch = 16 set p_roll = 43 set i_roll = 32 set d_roll = 13 set p_yaw = 100 set i_yaw = 41 set d_yaw = 8 set gyro_soft_lpf = ON ///////// rates /////////// set rc_rate = 100 set rc_expo = 70 set rc_yaw_expo = 20 set thr_mid = 50 set thr_expo = 0 set roll_rate = 70 set pitch_rate = 70 set yaw_rate = 105 set tpa_rate = 0 set tpa_breakpoint = 1500