Betaflight 3.5.5 Tuning With New Motors iFlight XING 2306 2450kv

So after tuning my quad with the new iFlight motors on trusted Betaflight 3.3.2, I updated over the weekend to 3.5.5. and did an initial tune. I put everything back to defaults for 3.5.5, did a full erase and started over. I did a test LOS flight after updating and noticed just a bit of bounce back after quick stops, so I bumped up proportional values just a bit. After a second flight (this time FPV) I noticed some movement on attitude so I also bumped up Integral values just a bit. So right now we are at; Roll P = 72 Pitch P = 80 Yaw P = 75 Roll I = 63 Pitch I = 70 Yaw I = 60 These are the only settings I have changed with the exception of my rates, which are not far from default. I use RC Rate of 1.02 on everything and SuperRate of .66 on all. I also use expo of .4 on everything. I really like it so far, not sure what else I would change at this point, might change some integral values around, roll seemed just a bit loose. Motors are not getting hot at all, just barely warm, everything performing well at this point. Going to an event this weekend with some friends, should be some crazy flying :) QAV 210 with OmniBusF4 Pro V2 and iPeaka 45A 32bit ESC's and powered by 1500mah 4s 100c Fat Shark Dominator V3 with FuriousFPV True D V3.7 receiver and ImmersionRC antennas. https://youtu.be/diABVxZVTX4 https://www.YouTube.com/user/JDogB1 https://www.FPVBook.com/FireBlade https://www.InstaGram.com/Jason_FireBladeFPV #betaflight #iFlight #XING