Multirotorevents friendly competition - FPV Drone Racing
- over 7 years ago
- 39 VŪZ
1 - 0
- Report
This is our monthly competition call multirotorevents.com
We flew 5 guys together with RHCP antennas
here are the frequency we use, thanks to Matt Caron:
5665 = E3
5809 = B5
5885 = E5
5925 = E7
5760 = F2
since his friends are not on raceband, he had to figure out other bands.
I love to use my gopro at race like this since I try to be the camera man. Has you saw, one race we where all close together, that was nice but I crash after a single lap! loll
I have learn that I still need to push harder on the throttle! I don't go fast enough.
Check out my playlist with lots more video just like this!
https://www.youtube.com/playlist?list=PLQS-COTd0E8J6qMcZeI5kbgC3AF36SYT5
My setup:
F40 2204 - 2300kv
Dal prop 5045 v2 tri
KISS FC
KISS 24A
HS1177
Tramp HV VTX
Custom V2 - 220mm frame
Hero 3+ (1080 60fps super view)
Tattu R-line 4S 1300
If you are a beginner, you can buy your parts and build your own. Here are some parts.
---------------- Combo kit ----------------------------------------------------------------
This is ~140$ US and you get 250 frame, 1806 motors, CC3D, 12A ESC, CC3D, 2.2A batterie, charger and 5030 props! (FREE shipping)
http://bit.ly/Banggood_combo_frame_2204_cc3d_ESC
This is ~145$ US and you get Emax 250 pure carbon frame, 2204 motors, CC3D, 12A ESC, CC3D and some carbon 6030 props!!! Not bad! (FREE shipping)
http://bit.ly/Banggood_combo_frame_1806_cc3d_ESC_batt_charger
---------------- Flight controller ----------------------------------------------------------------
CC3D flight controller
http://bit.ly/CC3D_flight_controller
AfroFlight Naze32 Acro flight controller
http://bit.ly/Naze32_flight_controller
---------------- Batteries ----------------------------------------------------------------
Nanotech 1.3A 45-90C (I really love these batteries!)
http://bit.ly/nanotech_3S_1300_45-90C
Nanotech 1.3A 25-50C (These have lower C rate but are CHEAP!!)
http://bit.ly/nanotech_3S_1300_25-50C
Nanotech 1.8A 65C-130C (This one need to be mounted on top of frame)
http://bit.ly/nanotech_3S_1800_65-130C
Turnigy 1500mAh 3S 25C
http://bit.ly/turnigy_3S_1500_25-35C
---------------- Charger ----------------------------------------------------------------
HobbyKing B6 AC/DC 50W Charger (US Plug)
http://bit.ly/B6_AC-DC_charger
---------------- Frames ----------------------------------------------------------------
250mm ZMR carbon fiber frame (~33$ US) (FREE shipping)
http://bit.ly/Banggood_ZMR_250_frame
250mm FPV frame
http://bit.ly/1GC4Jz4
---------------- Electronics ----------------------------------------------------------------
250mW Video transmitter (TS5823)
http://bit.ly/1Cz8rTM
12A ESC
http://bit.ly/1FNeSGl
---------------- Motors ----------------------------------------------------------------
Multistar 2204 Motors (Pack or 4)
http://bit.ly/1DAkioB
Turnigy 1806 Emax Motors (Pack of 4)
http://bit.ly/1FNf887
---------------- Props ----------------------------------------------------------------
Banggood Genfam 5030 black props (FREE shipping)
http://bit.ly/Banggood_Gemfan_5030_props
Genfam 5030 black props (You will need a LOT of those!)
http://bit.ly/1OqenWt
Genfam 5030 red props (Red does look good!)
http://bit.ly/1aHokA2
5030R (green) Three Blade Propeller
http://bit.ly/1I5lLD5
5030 (green) Three Blade Propeller
http://bit.ly/1yiLoQE
"basic implosion" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0/