The birth of a FPV racedrone
- over 7 years ago
- 63 VŪZ
4 - 5
- Report
The birth of a FPV racedrone and maiden flight - In this video I'm gonna show you how I make my own mini quad from scratch! I'm using my DIY CNC machine to cut parts out of 2 and 4 mm carbon fiber plates.
The CNC machine in this video is designed and build by me!
My CNC cutting settings for carbonfiber:
Feedrate: 350mm/min
Stepdown: 0.4mm/min
Plungerate: 150mm/min
Spindle speed: approx 25000rpm
I'm using 2 and 3.2mm 2 flute endmills for this build.
My quadcopter setup:
Aikon Electronics 30amp esc's (these esc's are amazing!!)
Motolab Cyclone running BF3.0 8/8/32khz
Emax RS2205 2300kv motors
EpiRex sbus receiver
TBS unify pro HV vtx
Pz0420m FPV camera with 30 degree angle and 2.5mm lens
The auw of this setup with HDcamera is approx 580gr.
Big thanks to my sponsors!
Aikon Electronics: www.aikonelectronics.com
G-fuel: www.gfuel.com
For a 10% discount on G-fuel products, use this coupon: RaymonFPV
Follow me on twitter @raymonkroeze
If you wish to contact me please email: raymonkroeze@gmail.com