intermittent video miniquad - FPV Drone Racing

I did some hard hard crash lately. The quad components survive except that my camera have intermittent video. it works but you touch it and the video cuts black!!! AH!!!!!! It did that the entire practice session!

I was able to get some shot.

Thanks for watching!
Give me a thumbs up if want to see more!
Share and subscribe!



Miniquad Specifications:
T-Motor F40 2204 - 2300kv
DAL 5045 tri V2
KISS FC (RC28)
KISS 24A
HS1177
HAWKEYE 200mW vtx
Custom 220mm frame
Hero 3+ (1080 60fps super view)
Bonka 4S 1300




Basic Implosion Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0/


If you are a beginner, you can buy your parts and build your own. Here are some parts.

---------------- Combo kit ----------------------------------------------------------------
This is ~140$ US and you get 250 frame, 1806 motors, CC3D, 12A ESC, CC3D, 2.2A batterie, charger and 5030 props! (FREE shipping)
http://bit.ly/Banggood_combo_frame_2204_cc3d_ESC

This is ~145$ US and you get Emax 250 pure carbon frame, 2204 motors, CC3D, 12A ESC, CC3D and some carbon 6030 props!!! Not bad! (FREE shipping)
http://bit.ly/Banggood_combo_frame_1806_cc3d_ESC_batt_charger

---------------- Flight controller ----------------------------------------------------------------

CC3D flight controller
http://bit.ly/CC3D_flight_controller

AfroFlight Naze32 Acro flight controller
http://bit.ly/Naze32_flight_controller

---------------- Batteries ----------------------------------------------------------------

Nanotech 1.3A 45-90C (I really love these batteries!)
http://bit.ly/nanotech_3S_1300_45-90C

Nanotech 1.3A 25-50C (These have lower C rate but are CHEAP!!)
http://bit.ly/nanotech_3S_1300_25-50C

Nanotech 1.8A 65C-130C (This one need to be mounted on top of frame)
http://bit.ly/nanotech_3S_1800_65-130C

Turnigy 1500mAh 3S 25C
http://bit.ly/turnigy_3S_1500_25-35C

---------------- Charger ----------------------------------------------------------------
HobbyKing B6 AC/DC 50W Charger (US Plug)
http://bit.ly/B6_AC-DC_charger

---------------- Frames ----------------------------------------------------------------

250mm ZMR carbon fiber frame (~33$ US) (FREE shipping)
http://bit.ly/Banggood_ZMR_250_frame

250mm FPV frame
http://bit.ly/1GC4Jz4

---------------- Electronics ----------------------------------------------------------------

250mW Video transmitter (TS5823)
http://bit.ly/1Cz8rTM

12A ESC
http://bit.ly/1FNeSGl

---------------- Motors ----------------------------------------------------------------

Multistar 2204 Motors (Pack or 4)
http://bit.ly/1DAkioB

Turnigy 1806 Emax Motors (Pack of 4)
http://bit.ly/1FNf887

---------------- Props ----------------------------------------------------------------

Banggood Genfam 5030 black props (FREE shipping)
http://bit.ly/Banggood_Gemfan_5030_props

Genfam 5030 black props (You will need a LOT of those!)
http://bit.ly/1OqenWt

Genfam 5030 red props (Red does look good!)
http://bit.ly/1aHokA2

5030R (green) Three Blade Propeller
http://bit.ly/1I5lLD5

5030 (green) Three Blade Propeller
http://bit.ly/1yiLoQE